B.F. Mahn & Sons Inc. is your local geothermal heating and cooling system maintenance, repair, installation and replacement expert!
Give our team a call when you are in need of geothermal system services! No matter how small or large your needs are we have you covered!
No matter if you're looking for routine geothermal system maintenance or are in a heating or cooling emergency, we have the skills and expertise to make sure your geothermal heat pump is in working order.
B.F. Mahn & Sons Geothermal Heat Pump Services
Just like trees and plants have different root systems, there are several coupling options to fit different climates, geologies, and lifestyles.
Vertical Ground Loops are perhaps the most common earth coupling system, primarily because they make good use of limited space. Holes are drilled into the earth, and then a pair of High Density Polyethylene (HDPE) pipes, connected by a “U” bend at the bottom are inserted into each hole. The bore holes are sealed with an environmentally safe grout material to enhance the transfer of heat to and from the earth, and to protect the subterranean environment. The underground pipes are connected together and run neatly into the home and are connected to a Bosch geothermal heat pump.
Horizontal ground loops are often less expensive to install, but need more surface area. Rather than drilling, trenchers or excavators are used to dig 4 to 6 feet deep (or more), and loop variations ranging from single pipes to slinky style are laid at the bottom of the excavation. The piping is connected together, and run into the home for connection to a Bosch geothermal heat pump. The excavation is backfilled, and returned to its original condition.
Pond loops are often the least expensive application as a geothermal source. Though bodies of surface water fluctuate with ambient temperatures, these fluctuations are not as marked as actual ambient temperatures. This application is well-suited in situations where the body of water is large enough, and where boating, fishing, or other activities do not pose a risk to the loops. Pond loops can provide advantages to marine life.
Also referred to as “Pump to Reinjection” or “Class V Thermal Exchange Well”, these systems are often the best choice for cooling dominant climates (including residential) where the warm climate predominantly requires cooling, and commercial applications. A pair of boreholes is drilled, one as the source well, and one as the injection well, and the water is pumped from the aquifer through the geothermal heat pumps, and injected back into the aquifer with no chemical change.
A Bosch Geothermal Heat Pump System will change the way look at any season! The unbelievable efficiency and reliability of a Bosch Geothermal system combined with B.F. Mahn & Sons' unparalleled heating and cooling services means that your home will always be a haven from cold and hot weather.
Call the team at B.F. Mahn & Sons today to get your geothermal heat pump system installation estimate! If your existing geothermal heat pump is in need of service or repair give us a call right away!